PNG  IHDRxsBIT|d pHYs+tEXtSoftwarewww.inkscape.org<,tEXtComment File Manager

File Manager

Path: /opt/alt/php53/etc/

Viewing File: php-fpm.conf.default

;;;;;;;;;;;;;;;;;;;;;
; FPM Configuration ;
;;;;;;;;;;;;;;;;;;;;;

; All relative paths in this configuration file are relative to PHP's install
; prefix (/opt/alt/php53). This prefix can be dynamicaly changed by using the
; '-p' argument from the command line.

; Include one or more files. If glob(3) exists, it is used to include a bunch of
; files from a glob(3) pattern. This directive can be used everywhere in the
; file.
; Relative path can also be used. They will be prefixed by:
;  - the global prefix if it's been set (-p arguement)
;  - /opt/alt/php53 otherwise
;include=etc/fpm.d/*.conf

;;;;;;;;;;;;;;;;;;
; Global Options ;
;;;;;;;;;;;;;;;;;;

[global]
; Pid file
; Note: the default prefix is /var
; Default Value: none
;pid = run/php-fpm.pid

; Error log file
; If it's set to "syslog", log is sent to syslogd instead of being written
; in a local file.
; Note: the default prefix is /var
; Default Value: log/php-fpm.log
;error_log = log/php-fpm.log

; syslog_facility is used to specify what type of program is logging the
; message. This lets syslogd specify that messages from different facilities
; will be handled differently.
; See syslog(3) for possible values (ex daemon equiv LOG_DAEMON)
; Default Value: daemon
;syslog.facility = daemon

; syslog_ident is prepended to every message. If you have multiple FPM
; instances running on the same server, you can change the default value
; which must suit common needs.
; Default Value: php-fpm
;syslog.ident = php-fpm

; Log level
; Possible Values: alert, error, warning, notice, debug
; Default Value: notice
;log_level = notice

; If this number of child processes exit with SIGSEGV or SIGBUS within the time
; interval set by emergency_restart_interval then FPM will restart. A value
; of '0' means 'Off'.
; Default Value: 0
;emergency_restart_threshold = 0

; Interval of time used by emergency_restart_interval to determine when 
; a graceful restart will be initiated.  This can be useful to work around
; accidental corruptions in an accelerator's shared memory.
; Available Units: s(econds), m(inutes), h(ours), or d(ays)
; Default Unit: seconds
; Default Value: 0
;emergency_restart_interval = 0

; Time limit for child processes to wait for a reaction on signals from master.
; Available units: s(econds), m(inutes), h(ours), or d(ays)
; Default Unit: seconds
; Default Value: 0
;process_control_timeout = 0

; The maximum number of processes FPM will fork. This has been design to control
; the global number of processes when using dynamic PM within a lot of pools.
; Use it with caution.
; Note: A value of 0 indicates no limit
; Default Value: 0
; process.max = 128

; Specify the nice(2) priority to apply to the master process (only if set)
; The value can vary from -19 (highest priority) to 20 (lower priority)
; Note: - It will only work if the FPM master process is launched as root
;       - The pool process will inherit the master process priority
;         unless it specified otherwise
; Default Value: no set
; process.priority = -19

; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging.
; Default Value: yes
;daemonize = yes
 
; Set open file descriptor rlimit for the master process.
; Default Value: system defined value
;rlimit_files = 1024
 
; Set max core size rlimit for the master process.
; Possible Values: 'unlimited' or an integer greater or equal to 0
; Default Value: system defined value
;rlimit_core = 0

; Specify the event mechanism FPM will use. The following is available:
; - select     (any POSIX os)
; - poll       (any POSIX os)
; - epoll      (linux >= 2.5.44)
; - kqueue     (FreeBSD >= 4.1, OpenBSD >= 2.9, NetBSD >= 2.0)
; - /dev/poll  (Solaris >= 7)
; - port       (Solaris >= 10)
; Default Value: not set (auto detection)
;events.mechanism = epoll

; When FPM is build with systemd integration, specify the interval,
; in second, between health report notification to systemd.
; Set to 0 to disable.
; Available Units: s(econds), m(inutes), h(ours)
; Default Unit: seconds
; Default value: 10
;systemd_interval = 10

;;;;;;;;;;;;;;;;;;;;
; Pool Definitions ; 
;;;;;;;;;;;;;;;;;;;;

; Multiple pools of child processes may be started with different listening
; ports and different management options.  The name of the pool will be
; used in logs and stats. There is no limitation on the number of pools which
; FPM can handle. Your system will tell you anyway :)

; Start a new pool named 'www'.
; the variable $pool can we used in any directive and will be replaced by the
; pool name ('www' here)
[www]

; Per pool prefix
; It only applies on the following directives:
; - 'slowlog'
; - 'listen' (unixsocket)
; - 'chroot'
; - 'chdir'
; - 'php_values'
; - 'php_admin_values'
; When not set, the global prefix (or /opt/alt/php53) applies instead.
; Note: This directive can also be relative to the global prefix.
; Default Value: none
;prefix = /path/to/pools/$pool

; Unix user/group of processes
; Note: The user is mandatory. If the group is not set, the default user's group
;       will be used.
user = nobody
group = nobody

; The address on which to accept FastCGI requests.
; Valid syntaxes are:
;   'ip.add.re.ss:port'    - to listen on a TCP socket to a specific address on
;                            a specific port;
;   'port'                 - to listen on a TCP socket to all addresses on a
;                            specific port;
;   '/path/to/unix/socket' - to listen on a unix socket.
; Note: This value is mandatory.
listen = 127.0.0.1:9000

; Set listen(2) backlog. A value of '-1' means unlimited.
; Default Value: 128 (-1 on FreeBSD and OpenBSD)
;listen.backlog = -1

; Set permissions for unix socket, if one is used. In Linux, read/write
; permissions must be set in order to allow connections from a web server. Many
; BSD-derived systems allow connections regardless of permissions. 
; Default Values: user and group are set as the running user
;                 mode is set to 0660
;listen.owner = nobody
;listen.group = nobody
;listen.mode = 0660
 
; List of ipv4 addresses of FastCGI clients which are allowed to connect.
; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
; must be separated by a comma. If this value is left blank, connections will be
; accepted from any ip address.
; Default Value: any
;listen.allowed_clients = 127.0.0.1

; Specify the nice(2) priority to apply to the pool processes (only if set)
; The value can vary from -19 (highest priority) to 20 (lower priority)
; Note: - It will only work if the FPM master process is launched as root
;       - The pool processes will inherit the master process priority
;         unless it specified otherwise
; Default Value: no set
; priority = -19

; Set the process dumpable flag (PR_SET_DUMPABLE prctl) even if the process user
; or group is differrent than the master process user. It allows to create process
; core dump and ptrace the process for the pool user.
; Default Value: no
; process.dumpable = yes

; Choose how the process manager will control the number of child processes.
; Possible Values:
;   static  - a fixed number (pm.max_children) of child processes;
;   dynamic - the number of child processes are set dynamically based on the
;             following directives. With this process management, there will be
;             always at least 1 children.
;             pm.max_children      - the maximum number of children that can
;                                    be alive at the same time.
;             pm.start_servers     - the number of children created on startup.
;             pm.min_spare_servers - the minimum number of children in 'idle'
;                                    state (waiting to process). If the number
;                                    of 'idle' processes is less than this
;                                    number then some children will be created.
;             pm.max_spare_servers - the maximum number of children in 'idle'
;                                    state (waiting to process). If the number
;                                    of 'idle' processes is greater than this
;                                    number then some children will be killed.
;  ondemand - no children are created at startup. Children will be forked when
;             new requests will connect. The following parameter are used:
;             pm.max_children           - the maximum number of children that
;                                         can be alive at the same time.
;             pm.process_idle_timeout   - The number of seconds after which
;                                         an idle process will be killed.
; Note: This value is mandatory.
pm = dynamic

; The number of child processes to be created when pm is set to 'static' and the
; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'.
; This value sets the limit on the number of simultaneous requests that will be
; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
; CGI. The below defaults are based on a server without much resources. Don't
; forget to tweak pm.* to fit your needs.
; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand'
; Note: This value is mandatory.
pm.max_children = 5

; The number of child processes created on startup.
; Note: Used only when pm is set to 'dynamic'
; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
pm.start_servers = 2

; The desired minimum number of idle server processes.
; Note: Used only when pm is set to 'dynamic'
; Note: Mandatory when pm is set to 'dynamic'
pm.min_spare_servers = 1

; The desired maximum number of idle server processes.
; Note: Used only when pm is set to 'dynamic'
; Note: Mandatory when pm is set to 'dynamic'
pm.max_spare_servers = 3

; The number of seconds after which an idle process will be killed.
; Note: Used only when pm is set to 'ondemand'
; Default Value: 10s
;pm.process_idle_timeout = 10s;
 
; The number of requests each child process should execute before respawning.
; This can be useful to work around memory leaks in 3rd party libraries. For
; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
; Default Value: 0
;pm.max_requests = 500

; The URI to view the FPM status page. If this value is not set, no URI will be
; recognized as a status page. It shows the following informations:
;   pool                 - the name of the pool;
;   process manager      - static, dynamic or ondemand;
;   start time           - the date and time FPM has started;
;   start since          - number of seconds since FPM has started;
;   accepted conn        - the number of request accepted by the pool;
;   listen queue         - the number of request in the queue of pending
;                          connections (see backlog in listen(2));
;   max listen queue     - the maximum number of requests in the queue
;                          of pending connections since FPM has started;
;   listen queue len     - the size of the socket queue of pending connections;
;   idle processes       - the number of idle processes;
;   active processes     - the number of active processes;
;   total processes      - the number of idle + active processes;
;   max active processes - the maximum number of active processes since FPM
;                          has started;
;   max children reached - number of times, the process limit has been reached,
;                          when pm tries to start more children (works only for
;                          pm 'dynamic' and 'ondemand');
; Value are updated in real time.
; Example output:
;   pool:                 www
;   process manager:      static
;   start time:           01/Jul/2011:17:53:49 +0200
;   start since:          62636
;   accepted conn:        190460
;   listen queue:         0
;   max listen queue:     1
;   listen queue len:     42
;   idle processes:       4
;   active processes:     11
;   total processes:      15
;   max active processes: 12
;   max children reached: 0
;
; By default the status page output is formatted as text/plain. Passing either
; 'html', 'xml' or 'json' in the query string will return the corresponding
; output syntax. Example:
;   http://www.foo.bar/status
;   http://www.foo.bar/status?json
;   http://www.foo.bar/status?html
;   http://www.foo.bar/status?xml
;
; By default the status page only outputs short status. Passing 'full' in the
; query string will also return status for each pool process.
; Example: 
;   http://www.foo.bar/status?full
;   http://www.foo.bar/status?json&full
;   http://www.foo.bar/status?html&full
;   http://www.foo.bar/status?xml&full
; The Full status returns for each process:
;   pid                  - the PID of the process;
;   state                - the state of the process (Idle, Running, ...);
;   start time           - the date and time the process has started;
;   start since          - the number of seconds since the process has started;
;   requests             - the number of requests the process has served;
;   request duration     - the duration in µs of the requests;
;   request method       - the request method (GET, POST, ...);
;   request URI          - the request URI with the query string;
;   content length       - the content length of the request (only with POST);
;   user                 - the user (PHP_AUTH_USER) (or '-' if not set);
;   script               - the main script called (or '-' if not set);
;   last request cpu     - the %cpu the last request consumed
;                          it's always 0 if the process is not in Idle state
;                          because CPU calculation is done when the request
;                          processing has terminated;
;   last request memory  - the max amount of memory the last request consumed
;                          it's always 0 if the process is not in Idle state
;                          because memory calculation is done when the request
;                          processing has terminated;
; If the process is in Idle state, then informations are related to the
; last request the process has served. Otherwise informations are related to
; the current request being served.
; Example output:
;   ************************
;   pid:                  31330
;   state:                Running
;   start time:           01/Jul/2011:17:53:49 +0200
;   start since:          63087
;   requests:             12808
;   request duration:     1250261
;   request method:       GET
;   request URI:          /test_mem.php?N=10000
;   content length:       0
;   user:                 -
;   script:               /home/fat/web/docs/php/test_mem.php
;   last request cpu:     0.00
;   last request memory:  0
;
; Note: There is a real-time FPM status monitoring sample web page available
;       It's available in: /opt/alt/php53/usr/share/fpm/status.html
;
; Note: The value must start with a leading slash (/). The value can be
;       anything, but it may not be a good idea to use the .php extension or it
;       may conflict with a real PHP file.
; Default Value: not set 
;pm.status_path = /status
 
; The ping URI to call the monitoring page of FPM. If this value is not set, no
; URI will be recognized as a ping page. This could be used to test from outside
; that FPM is alive and responding, or to
; - create a graph of FPM availability (rrd or such);
; - remove a server from a group if it is not responding (load balancing);
; - trigger alerts for the operating team (24/7).
; Note: The value must start with a leading slash (/). The value can be
;       anything, but it may not be a good idea to use the .php extension or it
;       may conflict with a real PHP file.
; Default Value: not set
;ping.path = /ping

; This directive may be used to customize the response of a ping request. The
; response is formatted as text/plain with a 200 response code.
; Default Value: pong
;ping.response = pong

; The access log file
; Default: not set
;access.log = log/$pool.access.log

; The access log format.
; The following syntax is allowed
;  %%: the '%' character
;  %C: %CPU used by the request
;      it can accept the following format:
;      - %{user}C for user CPU only
;      - %{system}C for system CPU only
;      - %{total}C  for user + system CPU (default)
;  %d: time taken to serve the request
;      it can accept the following format:
;      - %{seconds}d (default)
;      - %{miliseconds}d
;      - %{mili}d
;      - %{microseconds}d
;      - %{micro}d
;  %e: an environment variable (same as $_ENV or $_SERVER)
;      it must be associated with embraces to specify the name of the env
;      variable. Some exemples:
;      - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e
;      - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e
;  %f: script filename
;  %l: content-length of the request (for POST request only)
;  %m: request method
;  %M: peak of memory allocated by PHP
;      it can accept the following format:
;      - %{bytes}M (default)
;      - %{kilobytes}M
;      - %{kilo}M
;      - %{megabytes}M
;      - %{mega}M
;  %n: pool name
;  %o: ouput header
;      it must be associated with embraces to specify the name of the header:
;      - %{Content-Type}o
;      - %{X-Powered-By}o
;      - %{Transfert-Encoding}o
;      - ....
;  %p: PID of the child that serviced the request
;  %P: PID of the parent of the child that serviced the request
;  %q: the query string 
;  %Q: the '?' character if query string exists
;  %r: the request URI (without the query string, see %q and %Q)
;  %R: remote IP address
;  %s: status (response code)
;  %t: server time the request was received
;      it can accept a strftime(3) format:
;      %d/%b/%Y:%H:%M:%S %z (default)
;  %T: time the log has been written (the request has finished)
;      it can accept a strftime(3) format:
;      %d/%b/%Y:%H:%M:%S %z (default)
;  %u: remote user
;
; Default: "%R - %u %t \"%m %r\" %s"
;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%"
 
; The log file for slow requests
; Default Value: not set
; Note: slowlog is mandatory if request_slowlog_timeout is set
;slowlog = log/$pool.log.slow
 
; The timeout for serving a single request after which a PHP backtrace will be
; dumped to the 'slowlog' file. A value of '0s' means 'off'.
; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
; Default Value: 0
;request_slowlog_timeout = 0
 
; The timeout for serving a single request after which the worker process will
; be killed. This option should be used when the 'max_execution_time' ini option
; does not stop script execution for some reason. A value of '0' means 'off'.
; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
; Default Value: 0
;request_terminate_timeout = 0
 
; Set open file descriptor rlimit.
; Default Value: system defined value
;rlimit_files = 1024
 
; Set max core size rlimit.
; Possible Values: 'unlimited' or an integer greater or equal to 0
; Default Value: system defined value
;rlimit_core = 0
 
; Chroot to this directory at the start. This value must be defined as an
; absolute path. When this value is not set, chroot is not used.
; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
; of its subdirectories. If the pool prefix is not set, the global prefix
; will be used instead.
; Note: chrooting is a great security feature and should be used whenever 
;       possible. However, all PHP paths will be relative to the chroot
;       (error_log, sessions.save_path, ...).
; Default Value: not set
;chroot = 
 
; Chdir to this directory at the start.
; Note: relative path can be used.
; Default Value: current directory or / when chroot
;chdir = /var/www
 
; Redirect worker stdout and stderr into main error log. If not set, stdout and
; stderr will be redirected to /dev/null according to FastCGI specs.
; Note: on highloaded environement, this can cause some delay in the page
; process time (several ms).
; Default Value: no
;catch_workers_output = yes

; Limits the extensions of the main script FPM will allow to parse. This can
; prevent configuration mistakes on the web server side. You should only limit
; FPM to .php extensions to prevent malicious users to use other extensions to
; exectute php code.
; Note: set an empty value to allow all extensions.
; Default Value: .php
;security.limit_extensions = .php .php3 .php4 .php5
 
; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
; the current environment.
; Default Value: clean env
;env[HOSTNAME] = $HOSTNAME
;env[PATH] = /usr/local/bin:/usr/bin:/bin
;env[TMP] = /tmp
;env[TMPDIR] = /tmp
;env[TEMP] = /tmp

; Additional php.ini defines, specific to this pool of workers. These settings
; overwrite the values previously defined in the php.ini. The directives are the
; same as the PHP SAPI:
;   php_value/php_flag             - you can set classic ini defines which can
;                                    be overwritten from PHP call 'ini_set'. 
;   php_admin_value/php_admin_flag - these directives won't be overwritten by
;                                     PHP call 'ini_set'
; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.

; Defining 'extension' will load the corresponding shared extension from
; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
; overwrite previously defined php.ini values, but will append the new value
; instead.

; Note: path INI options can be relative and will be expanded with the prefix
; (pool, global or /opt/alt/php53)

; Default Value: nothing is defined by default except the values in php.ini and
;                specified at startup with the -d argument
;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com
;php_flag[display_errors] = off
;php_admin_value[error_log] = /var/log/fpm-php.www.log
;php_admin_flag[log_errors] = on
;php_admin_value[memory_limit] = 32M
b IDATxytVսϓ22 A@IR :hCiZ[v*E:WũZA ^dQeQ @ !jZ'>gsV仿$|?g)&x-EIENT ;@xT.i%-X}SvS5.r/UHz^_$-W"w)Ɗ/@Z &IoX P$K}JzX:;` &, ŋui,e6mX ԵrKb1ԗ)DADADADADADADADADADADADADADADADADADADADADADADADADADADADADADADADADADADADADADADADADADA݀!I*]R;I2$eZ#ORZSrr6mteffu*((Pu'v{DIߔ4^pIm'77WEEE;vƎ4-$]'RI{\I&G :IHJ DWBB=\WR޽m o$K(V9ABB.}jѢv`^?IOȅ} ڶmG}T#FJ`56$-ھ}FI&v;0(h;Б38CӧOWf!;A i:F_m9s&|q%=#wZprrrla A &P\\СC[A#! {olF} `E2}MK/vV)i{4BffV\|ۭX`b@kɶ@%i$K z5zhmX[IXZ` 'b%$r5M4º/l ԃߖxhʔ)[@=} K6IM}^5k㏷݆z ΗÿO:gdGBmyT/@+Vɶ纽z񕏵l.y޴it뭷zV0[Y^>Wsqs}\/@$(T7f.InݺiR$푔n.~?H))\ZRW'Mo~v Ov6oԃxz! S,&xm/yɞԟ?'uaSѽb,8GלKboi&3t7Y,)JJ c[nzӳdE&KsZLӄ I?@&%ӟ۶mSMMњ0iؐSZ,|J+N ~,0A0!5%Q-YQQa3}$_vVrf9f?S8`zDADADADADADADADADAdqP,تmMmg1V?rSI꒟]u|l RCyEf٢9 jURbztѰ!m5~tGj2DhG*{H9)꒟ר3:(+3\?/;TUݭʴ~S6lڧUJ*i$d(#=Yݺd{,p|3B))q:vN0Y.jkק6;SɶVzHJJЀ-utѹսk>QUU\޲~]fFnK?&ߡ5b=z9)^|u_k-[y%ZNU6 7Mi:]ۦtk[n X(e6Bb."8cۭ|~teuuw|ήI-5"~Uk;ZicEmN/:]M> cQ^uiƞ??Ңpc#TUU3UakNwA`:Y_V-8.KKfRitv޲* 9S6ֿj,ՃNOMߤ]z^fOh|<>@Å5 _/Iu?{SY4hK/2]4%it5q]GGe2%iR| W&f*^]??vq[LgE_3f}Fxu~}qd-ږFxu~I N>\;͗O֊:̗WJ@BhW=y|GgwܷH_NY?)Tdi'?խwhlmQi !SUUsw4kӺe4rfxu-[nHtMFj}H_u~w>)oV}(T'ebʒv3_[+vn@Ȭ\S}ot}w=kHFnxg S 0eޢm~l}uqZfFoZuuEg `zt~? b;t%>WTkķh[2eG8LIWx,^\thrl^Ϊ{=dž<}qV@ ⠨Wy^LF_>0UkDuʫuCs$)Iv:IK;6ֲ4{^6եm+l3>݆uM 9u?>Zc }g~qhKwڭeFMM~pМuqǿz6Tb@8@Y|jx](^]gf}M"tG -w.@vOqh~/HII`S[l.6nØXL9vUcOoB\xoǤ'T&IǍQw_wpv[kmO{w~>#=P1Pɞa-we:iǏlHo׈꒟f9SzH?+shk%Fs:qVhqY`jvO'ρ?PyX3lх]˾uV{ݞ]1,MzYNW~̈́ joYn}ȚF߾׮mS]F z+EDxm/d{F{-W-4wY듏:??_gPf ^3ecg ҵs8R2מz@TANGj)}CNi/R~}c:5{!ZHӋӾ6}T]G]7W6^n 9*,YqOZj:P?Q DFL|?-^.Ɵ7}fFh׶xe2Pscz1&5\cn[=Vn[ĶE鎀uˌd3GII k;lNmشOuuRVfBE]ۣeӶu :X-[(er4~LHi6:Ѻ@ԅrST0trk%$Č0ez" *z"T/X9|8.C5Feg}CQ%͞ˣJvL/?j^h&9xF`њZ(&yF&Iݻfg#W;3^{Wo^4'vV[[K';+mӍִ]AC@W?1^{එyh +^]fm~iԵ]AB@WTk̏t uR?l.OIHiYyԶ]Aˀ7c:q}ힽaf6Z~қm(+sK4{^6}T*UUu]n.:kx{:2 _m=sAߤU@?Z-Vކеz왍Nэ{|5 pڶn b p-@sPg]0G7fy-M{GCF'%{4`=$-Ge\ eU:m+Zt'WjO!OAF@ik&t݆ϥ_ e}=]"Wz_.͜E3leWFih|t-wZۍ-uw=6YN{6|} |*={Ѽn.S.z1zjۻTH]흾 DuDvmvK.`V]yY~sI@t?/ϓ. m&["+P?MzovVЫG3-GRR[(!!\_,^%?v@ҵő m`Y)tem8GMx.))A]Y i`ViW`?^~!S#^+ѽGZj?Vģ0.))A꨷lzL*]OXrY`DBBLOj{-MH'ii-ϰ ok7^ )쭡b]UXSְmռY|5*cֽk0B7镹%ڽP#8nȎq}mJr23_>lE5$iwui+ H~F`IjƵ@q \ @#qG0".0" l`„.0! ,AQHN6qzkKJ#o;`Xv2>,tێJJ7Z/*A .@fفjMzkg @TvZH3Zxu6Ra'%O?/dQ5xYkU]Rֽkق@DaS^RSּ5|BeHNN͘p HvcYcC5:y #`οb;z2.!kr}gUWkyZn=f Pvsn3p~;4p˚=ē~NmI] ¾ 0lH[_L hsh_ғߤc_њec)g7VIZ5yrgk̞W#IjӪv>՞y睝M8[|]\շ8M6%|@PZڨI-m>=k='aiRo-x?>Q.}`Ȏ:Wsmu u > .@,&;+!!˱tﭧDQwRW\vF\~Q7>spYw$%A~;~}6¾ g&if_=j,v+UL1(tWake:@Ș>j$Gq2t7S?vL|]u/ .(0E6Mk6hiۺzښOrifޱxm/Gx> Lal%%~{lBsR4*}{0Z/tNIɚpV^#Lf:u@k#RSu =S^ZyuR/.@n&΃z~B=0eg뺆#,Þ[B/?H uUf7y Wy}Bwegל`Wh(||`l`.;Ws?V@"c:iɍL֯PGv6zctM̠':wuW;d=;EveD}9J@B(0iհ bvP1{\P&G7D޴Iy_$-Qjm~Yrr&]CDv%bh|Yzni_ˆR;kg}nJOIIwyuL}{ЌNj}:+3Y?:WJ/N+Rzd=hb;dj͒suݔ@NKMԄ jqzC5@y°hL m;*5ezᕏ=ep XL n?מ:r`۵tŤZ|1v`V뽧_csج'ߤ%oTuumk%%%h)uy]Nk[n 'b2 l.=͜E%gf$[c;s:V-͞WߤWh-j7]4=F-X]>ZLSi[Y*We;Zan(ӇW|e(HNNP5[= r4tP &0<pc#`vTNV GFqvTi*Tyam$ߏWyE*VJKMTfFw>'$-ؽ.Ho.8c"@DADADADADADADADADA~j*֘,N;Pi3599h=goضLgiJ5փy~}&Zd9p֚ e:|hL``b/d9p? fgg+%%hMgXosج, ΩOl0Zh=xdjLmhݻoO[g_l,8a]٭+ӧ0$I]c]:粹:Teꢢ"5a^Kgh,&= =՟^߶“ߢE ܹS J}I%:8 IDAT~,9/ʃPW'Mo}zNƍ쨓zPbNZ~^z=4mswg;5 Y~SVMRXUյڱRf?s:w ;6H:ºi5-maM&O3;1IKeamZh͛7+##v+c ~u~ca]GnF'ټL~PPPbn voC4R,ӟgg %hq}@#M4IÇ Oy^xMZx ) yOw@HkN˖-Sǎmb]X@n+i͖!++K3gd\$mt$^YfJ\8PRF)77Wא!Cl$i:@@_oG I{$# 8磌ŋ91A (Im7֭>}ߴJq7ޗt^ -[ԩSj*}%]&' -ɓ'ꫯVzzvB#;a 7@GxI{j޼ƌ.LÇWBB7`O"I$/@R @eee@۷>}0,ɒ2$53Xs|cS~rpTYYY} kHc %&k.], @ADADADADADADADADA@lT<%''*Lo^={رc5h %$+CnܸQ3fҥK}vUVVs9G R,_{xˇ3o߾;TTTd}馛]uuuG~iԩ@4bnvmvfϞ /Peeeq}}za I~,誫{UWW뮻}_~YƍSMMMYχ֝waw\ďcxꩧtEƍկ_?۷5@u?1kNׯWzz/wy>}zj3 k(ٺuq_Zvf̘:~ ABQ&r|!%KҥKgԞ={<_X-z !CyFUUz~ ABQIIIjݺW$UXXDٳZ~ ABQƍecW$<(~<RSSvZujjjԧOZQu@4 8m&&&jԩg$ď1h ͟?_{768@g =@`)))5o6m3)ѣƌJ;wҿUTT /KZR{~a=@0o<*狔iFɶ[ˎ;T]]OX@?K.ۈxN pppppppppppppppppPfl߾] ,{ァk۶mڿo5BTӦMӴiӴ|r DB2e|An!Dy'tkΝ[A $***t5' "!駟oaDnΝ:t֭[gDШQ06qD;@ x M6v(PiizmZ4ew"@̴ixf [~-Fٱc&IZ2|n!?$@{[HTɏ#@hȎI# _m(F /6Z3z'\r,r!;w2Z3j=~GY7"I$iI.p_"?pN`y DD?: _  Gÿab7J !Bx@0 Bo cG@`1C[@0G @`0C_u V1 aCX>W ` | `!<S `"<. `#c`?cAC4 ?c p#~@0?:08&_MQ1J h#?/`7;I  q 7a wQ A 1 Hp !#<8/#@1Ul7=S=K.4Z?E_$i@!1!E4?`P_  @Bă10#: "aU,xbFY1 [n|n #'vEH:`xb #vD4Y hi.i&EΖv#O H4IŶ}:Ikh @tZRF#(tXҙzZ ?I3l7q@õ|ۍ1,GpuY Ꮿ@hJv#xxk$ v#9 5 }_$c S#=+"K{F*m7`#%H:NRSp6I?sIՖ{Ap$I$I:QRv2$Z @UJ*$]<FO4IENDB`